Making Your Own Solar Panels is Not Difficult

Yeek — Thu, 27 May 2010 16:28:27 +0000

High quality and processed silicon solar panels are easily available in the market today. Whether it’s residential or home use, people are now considering making their own solar panels.

The most frequently and commonly asked mind is that is it toilsome to make solar panels all by myself?

Solar panels are very easy to be made in classhold by making use of templets which are very easily available online. Also, you can use the kits that are available at or so all of the electrical stores. People with the spirit of usually doing their electrical equipments at work will find the action very easy. Even if you don’t have any experience, a good guide with step by step procedures that includes pictures and videos too will be really helpful to you.

Solar cells or photovoltaic cells are one of the first things needed . They are very light in weight and taken anywhere . You need to choose on where you want to make solar panels and install them. Flat rooftop, back yard or garden of the house are the main best places for making and installing your own solar panels because these are the only places in which we receive huge amount of sunlight.

After you select the correct spot , start the procedure.

Below are some of the components which are necessity in making these panels:

A copper sheet
2 Nos. of alligator clips
A micrometer with the capacity to read the currents between ten to fifteen amperes
One electric stove
Sand paper, tap water, table salt and sheet metal shears

Cut the copper in the exact size of your electric stove. Clean the copper sheet exhaustively for any conceivable traces of oxidization. Heat it on the burner till the colour changes to brown and then finally into a pack layer of black coat. Then this sheet should be linked together with another copper sheet of the same size. Join them by using alligator clips and place it into a bottle. Make sure that the two sheets don’t touch each other. The black copper sheet must be connected to the terminal which says negative and the other one connected to the positive terminal.

Now place saltwater at the bottom of the plates and make sure that the clips are dry and doesn’t touch the water. This is how you pass electricity from the rays of the sun.

Just as , the black copper plate acts as the semiconductor! It is a kind of an insulator where electrons are tightly bounded with their atoms and do not flow freely and acts as a conductor where electricity will flow severally.

When solar energy hits this semiconductor, it will also hit the electrons. Some of these electrons gain so much energy that they will ultimately generate electricity. These electrons then move to the saltwater, into the clean copper sheet, into the wire and then through meter goes back to the semiconductor and generate electricity.

Make your home solar friendly and cut down your electricity bills as you now know how to make your own solar panels.

How to Use Water as Fuel to Run Your Car With Water-for-gas Method

admin — Tue, 04 Mar 2008 18:49:46 +0000

Zuberr Nowrung asked:

Do you want to know how to make use of water as fuel in you car? A lot of people still don’t know that it is possible to “run a car on water“. There are many videos on Internet that show people installing the conversion kits needed to do this. I know I was very skeptical at first, but what can I say, it works! Water (as we know it) is not combustible like petrol, so how can it produce energy at all? If cars can really run with water, then why isn’t everybody doing that?

There is a way, believe it or not, and it can be done by burning water in place of gas in your car. Well, I understand this will sound a little crazy to some people. Something like this, you think you will only see in the movies, however it is truly possible and easily accessible for anyone with a low budget. Again, it might sound complicated at first, using water as fuel. Believe me when I say it is really easy and will save literally hundreds or even thousands of dollars each year, and the best part is you don’t have to pay a mechanic to do it (unless you don’t know where your car’s engine is).

This technology works by connecting a small current from the car’s electrical equipments to enable a process called electrolysis to take place. From there, it gets supplied to a reservoir/container, which will contain a mixture of water and a touch of baking soda. Sounds weird? It’s science. When using the electrical current, water atoms will split in HHO gas, i.e. Brown’s Gas. Dont worry, this procedure is very safe, steady, and clean burning gas.

The mixture is steered to the car’s combustion system that results in a super combination of fuel, air, and HHO gas. This combination burns the cleaner and more efficiently your conventional mixture. The final product is a considerable boost in your MPG, miles per gallon. Hence, we can say we are running a car on water. I think everybody would like this result! When you see the illustrations, you will get a better understanding of all this.

Many people have asked “Will it spoil my car or vehicle?”. Well I say with confidence that it will NOT spoil your vehicle. I know your car is dear to you, like mine is dear to me. In fact, the water4gas method will even extend the life of your automobile. Another question often asked is, “Does it make my guarantee invalid?” The answer is no, it doesn’t. What many people are unaware of, is that hydrogen car adaptation is 100% reversible. Therefore, any process which is reversible, will not void your warranty! How much water will it require? It really does not need much at all, just a few glasses will keep you going for weeks. That’s the great thing about running your car on water.

See The Best Do It Yourself Guides Compared

Hydrogen Car Kit » Electrical Equipments

Making Your Own Solar Panels is Not Difficult

How to Use Water as Fuel to Run Your Car With Water-for-gas Method